tag:blogger.com,1999:blog-66782756149720405302024-02-19T15:23:06.412-08:00Gas Cooker StoveAdminhttp://www.blogger.com/profile/17129050443780353045noreply@blogger.comBlogger4125tag:blogger.com,1999:blog-6678275614972040530.post-30284710331901123562011-12-11T22:34:00.001-08:002011-12-11T22:45:23.035-08:00Electric ignition vs Magnetic Ignition Gas StoveFor gas stove under $100, there are 2 kind of flame ignition. Magnetic or mechanic ignition and electric ignition. Both have their own benefit. Electric ignition is silent, so there is no sound when you turn on your stove, but you need battery as an exchange. The other hand, magnetic ignition don't need any batteries, but it sound lound to start burning. The weakness of electric ignition, the pin to make spark is located so close to the burner, that made the pin heaten while cooking. Sometime that make the spark won't turn on. With magnetic ignition, the pin located far from the burner, but it need some sprayer to send flame to the burner. Sometime, the sprayer don't work properly.<br />
<br />
Magnetic ignition is easier to maintain, because it do not need any electrical instrument. Electronic instrument rather difficult to find. For gas stove bellow $100, you prefer use the magnetic / mechanic ignition.Adminhttp://www.blogger.com/profile/17129050443780353045noreply@blogger.com0tag:blogger.com,1999:blog-6678275614972040530.post-37790011354358881192011-12-06T21:04:00.001-08:002011-12-06T21:16:25.746-08:00Gas Stove Mechanic Ignition Repair TipsYour gas stove mechanic ignition doesn't work? Well, thats happened when your gas stove have been used for more than one year at least. Many of the malfuctions usually caused by the part that trigger electric spark. In the machine, down bottom of it, there is a screw you need to open to get the broken part out. Next to coil springs, there a metal that produce electric ignition. It look like the "L" leter. If it broken, the shape will be "I" shape. The knop cannot reach that metal because of it. All you need to do is only replace that part.Adminhttp://www.blogger.com/profile/17129050443780353045noreply@blogger.com0tag:blogger.com,1999:blog-6678275614972040530.post-17437453855198037162011-12-06T04:10:00.001-08:002011-12-06T04:21:42.681-08:00Small Flame, or Gas Not Flow on LPG Gas StoveSome customer ask me about their gas stove. Why one of my 2 burner gas stove can't turn on? Another ask, why the flame is too small even the knop already on max level. The answer maybe on the regulator they use. The pipe or hose probably dirty, but gas always able to escape. But the regulator is a part that control the pressure of the propane tank. If that part malfuction, then the flow of propane also got trouble. Most the couse is regulator that got oil and dirt. Just drop few water with liq detergent on the outer flow of the regulator, and it will fixed it.Normal gas regulator has small part like marbles to quit leaking gas. If it dirty, the gas won't flow normally, sometime never flow at all, so once again. water with liquid detergent able to fix it.Adminhttp://www.blogger.com/profile/17129050443780353045noreply@blogger.com0tag:blogger.com,1999:blog-6678275614972040530.post-2465963778778005962011-12-06T04:00:00.001-08:002011-12-06T04:09:17.426-08:00Gas Stove Red FlameRed flame of gas burner mostly caused by unproportional mixture between gas and air. There is a part below the knop need to set to fix that problem. Just turn it right or left to get the best flame. Just that easy. Red flame can be caused by dirt also. mostly on the burner part so the air leak in to the gas flow and made the mixture of gas-air not correct. So regularly fix the burner and part below it so no crootion and dirt exist. It's very common that dirt with oil on that area turn to make your stove malfuction.Adminhttp://www.blogger.com/profile/17129050443780353045noreply@blogger.com0